Nakayama PB7200, Руководство пользователя

Страница: 20 / 38

www.NakayamaTools.com
20
-
Always be sure of your footing on slopes.
-
Walk, never run.
-
Exercise extreme caution when changing direction on slopes.
-
Do not cutting excessively steep slopes.
-
Use extreme caution when reversing or pulling the appliance towards you.
-
Never operate the appliance with defective guards or shields, or without safety
devices.
-
Switch on the motor according to instructions and with feet well away from the
blade(s).
-
In this case, do not tilt it more than absolutely necessary and lift only the part which
is away from the operator. Always ensure that both hands are in the operating
position before returning the appliance to the gr ound.
-
Do not put hands or feet near or under rotating parts.
-
Never pick up or carry an appliance while the motor is running.
-
Pull the spark from the socket:
· whenever you leave the machine;
· before clearing a blockage;
· before checking, cleaning or wor king on the appliance;
· after striking a foreign object. Inspect the appliance for damage and make repairs
as necessary;
· if the appliance starts to vibrate abnormally (check immediately).
4) Maintenance and storage
-
Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working
condition.
-
Check the grass catcher frequently for wear or deterioration.
-
Replace worn or damaged parts for safety.
For rotary mowers, ensure that only replacement cutting means of the right type
are used.
- N ever store the equipment with petrol in the tank inside a building where fumes
can reach an open flame or spark;
- Allow the engine to cool before storing in any enclosure;
- T o reduce the fire hazard, keep the engine, silencer, battery compartment and
pet rol storage area free of grass, leaves, or excessive grease;
- I f the fuel tank has to be drained, this should be done outdoors.
SPECIAL SAFETY WARNING
1.Grip the handles of the brush cutter firmly with both hands. If you
suspend the work, Place the throttle into the idling position.
2.Always be sure to maintain a steady, even posture while working.
3.Maintain the speed of the engine at the level required to perform cutting
work and never raise the speed of the engine above the level necessary.
4.If the grass gets caught in the blade during operation , or if you need to
check the unit of refuel the tank always be sure to turn off the engine.
5.If the blade touches a hand object like a stone immediately stop the
engine and check it something is wrong wit h the blade. If so,replace the
blade by new one .
6.If someone calls out white working , always be sure to turn off the engine
before turning around.
7.Never touch the spark plug or plug cord while the engine is in operation
.Doing so may result in being subjected to an electrical shock .