EN
Cutting height setting
Shifting the depth limiter shall set up the required depth
of tilling. 3 different positions are possible
.
Switching unit on/off
Set
the lever
to
the
choke position
(Fig
.
15
). Pull the
starter cable evenly. The engine should start up after 3-5
pulls.
Set
the lever
to
the required speed
setting
and pull
the driving lever (Fig.
16) against the handle.
Notice:
If the engine is heated up, it is possible to start up
in the slow/fast position.
With the driving lever tripped, the drive will be off but the
engine
will still be on
. The engine may be switched off
with the switch in
OFF
position (Fig.
15
)
Operator
s
afety
i
nstruction
s
* Do not use the machine until you have read the instruction manual carefully.
* Observe
all
safety instruction
s
included in the manual.
*
Be especially careful while operating the machine when other persons are nearby.
* The unit is
equipped with
a foot-operated brake than stops the blades within 3 seconds after the drive lever trip
s
. Never
attempt
to
stop
or tilt the
unit with
the
blades still rotating. Wait for the blades to
completely stop rotating.
* If the blades
come into contact
with foreign objects, stop the engine immediately
, wait for the blades to completely stop
rotating
and check
the unit
for
damage. Continue working only if no damage is detected on the unit.
* Walk while working and do not run.
* Always walk forward only. Never pull the unit walking backwards.
* When working on a slope, always work across, never down and up. Be particularly careful when changing direction.
* When travelling across no-grass areas and transferring the unit from the work area to another one, the blades must not be
operating.
Step-by-
s
tep
i
nstructions
1.
Fill in the fuel (see chapter
''Assembly and first time operation''
)
2.
Clear any foreign objects from the land.
3.
Spud the land until the soil is sufficiently loose.
4.
Clean the unit thoroughly after every use.
WWW.NIKOLAOUTOOLS.GR
7
Fig
.
14
Fig
.
15
Fig
.
16
Содержание MB5005
