Nakayama EM3410, Руководство пользователя

Страница: 12 / 19

EN
WWW.NAKAYAMATOOLS.COM
9
Technical Data
Model: EM3410
Power: 1400W
Container capacity: 35L
Cutting width: 34CM
Height adjustment: 25-65mm (5 Positions)
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the prod-
ucts. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in
the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses
or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
Symptom Possible cause Remedy
Machine fails to operate Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Mower in long grass
Motor protector has activated
Safety cut out has activated
Turn power on
Use another socket
Inspect cable, replace if damaged.
Replace fuse
Increase height of cut and tilt mower
Allow to cool and increase height of cut
Allow to cool for a few minutes and increase height of cut
At this time do not operate the switch lever 1 as this will prolong the reset
time of the safety cut out
Machine functions intermittently Height of cut too low
Cutting blade blunt
Underside of machine badly clogged
Blade fitted upside down
Increase height of cut (see height of Cut Adjustment )
Replace blade
Clean machine
Refit blade correctly
Cutting blade not rotating Cutting blade obstructed Blade nut/
bolt loose.
Clear obstruction Tighten blade nut/bolt
Excessive vibration/noise Blade nut/bolt loose
Cutting blade damaged
Tighten blade nut/bolt Replace blade
Troubleshooting