Nakayama EB9000, Руководство по эксплуатации

Страница: 13 / 23

13
- Avoid contact with obstacles (stones, walls,
fences, etc.) as this will rapidly wear out the lines.
- Do not deposit the cutting head on the ground
during operation.
- Ensure that the cutting head has stopped before
you deposit the equipment on the ground.
- Cut the grass by swaying the trimmer sideways
to the right and left. Cut slowly, keeping the
appliance inclined forward slightly when cutting.
Cut tall grass by a series of levels from top to
bottom.
8. Technical data
voltage: 230-240V~ 50Hz
power: 900 W
Max. speed of spindle: 8000 min
-1
Sound power level L
wA
: 99.27 dB(A)
Sound pressure level L
PA
: 90.2dB(A)
vibration: 6.795m/s
2
K=1.5m/s
2
Dia. cutting head: 360mm
length of nylon line: 8m
Dia. cutting blade: 230mm
Noise and vibration values have been determined
according to the standards and regulations
mentioned in the declaration of conformity.
Technical and optical changes may be
undertaken in the course of further development
without notice. All dimensions, references
and information in this instruction manual are
therefore not guaranteed. Legal claims made on
the basis of the instruction manual can therefore
not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard testing
procedure and may be used to compare one
power tool to another.
The stated vibration emission value may also be
beyond the cord cutter.
7.4 Exchanging the line spool
- Disconnect the plug from the mains socket.
- Turn over the trimmer so that the cutting head
is facing upwards.
- Remove the line spool from the cutting head.
- Insert the new spool with the smooth side
facing upwards in the cutting head.
7.5 Install pack strap (B11).
- Find out the Pack strap(12). It is a black color
swathe.
- Press spring handcuff down and then handcuff
the plastic buckle holes of the lock hump. Then
loosen your fingers.
The PACK STRAP connected a metal and spring
handcuff. When you are pressing the spring, it
will be open. Loosened it was be closed. The end
of shoulder grip is riveting a red tape and a metal
pin. The pin has safety protection function. When
the work environment or the machine had an
accident situations, you can pull the pin out. This
design allows you leave to the dangerous safely
and quickly.
7.6 Cutting grass
WARNING. Danger of injury!
- Do not cut moist or wet grass.
- Before starting the trimmer check that the
cutting head will not come into contact with
stones, rubble or other foreign bodies.
- Switch on the trimmer before you approach the
grass that is to be cut.
- Always trail the extension cable behind you.
Do not pass the operating trimmer over the
extension cable as the cable could be damaged.
- Do not overload the trimmer during operation.