Nakayama EB9000, Руководство по эксплуатации

Страница: 11 / 23

11
- Check that the mains voltage is the same as
indicated on the rating plate.
- Wherever possible connect the equipment to
a power socked with a residualcurrent circuit
breaker that has a rated current of not more than
30 mA.
- Protect the equipment from moisture. The
equipment must not be moist nor operated in a
moist environment.
- Always check the equipment, power cable
and plug for damage before operating the
equipment. Avoid body contact with earthed
parts (e.g. metal fences, metal posts).
- Never pass an operating equipment over the
extension cable. Ensure that the power cable is
always trailing behind the operator.
- Use the envisaged cable suspensions when
attaching an extension cable.
- Never carry the equipment by its power cable.
Never pull the cable to disconnect the plug from
the mains socket. Protect the cable from heat, oil
and sharp edges.
Residual risks
Even when the tool is used as prescribed it is not
possible to eliminate all residual risk factors. The
following hazards may arise in connection with
the tool’s construction and design:
1. Damage to lungs if an effective dust mask is
not worn.
2. Damage to hearing if effective hearing
protection is not worn.
3. Health defects resulting from vibration
emission if the power tool is being
used over longer period of time or not
adequately managed and properly maintained.
WARNING!
This machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the
medical implant manufacturer before operating
this machine.
5. Components
1. Main handle
2. ON/OFF Switch
3. Safety switch
4. Strain relief
5. Additional handle
6. Knurled nut and screw
7. cross recessed screw
8. Telescopic tube
9. Protection cover
10. Cutting head
11. Line spool
12. Cutting blade
13. shoulder Strap
14. Hex Wrench
15. carrier plate
16. outer plate
17. Washer
18. Nut
19. plug wrench
6. Assembling instructions
6.1 Assembling/ Dismantling the protection
cover (B3-1/B3-2):
- Connect the protection cover to the motor head
- Secure the protection cover with the 3 cross
recessed screws(7) included in delivery.
- In order to remove the protection cover,
unscrew the 3 cross recessed screws(7) on the
protection cover