Nakayama 310.750.330, Руководство по эксплуатации

Страница: 9 / 23

9
the power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained. If the power cable is damaged,
it must be replaced by the manufacturer, its
service agent or a similarly qualified person in
order to avoid any danger.
4. Additional safety instructions
Ensure that you are completely familiar
with all the operating parts before you start
working with the equipment. Ask an experienced
user or expert to explain all its functions, manner
of operation and working techniques, and
practise operating the equipment. Ensure that
you can instantly turn off the equipment in the
event of an emergency. Incorrect use of the
equipment can result in very serious injuries.
- Never allow children and people who are not
familiar with these Operating Instructions to use
the equipment. Local regulations may stipulate a
minimum age for operators.
- The device must not be used by people
(including children) with limited physical, sensory
or mental faculties or who lack the necessary
experience and/or knowledge - other than they
are supervised by a person responsible for safety
or are being instructed to operate the appliance
by such a person.
- Children must be supervised to ensure that they
do not play with the equipment.
- Keep the equipment well away from by-
standers, children and pets. Turn off the
equipment if they are in the vicinity.
- The protective devices and your personal
protective equipment will protect yourself and
other people and ensure that the equipment can
be smoothly operated:
Always wear appropriate work clothes and
personal protective equipment!
Always wear a face shield or goggles as well as
ear defenders, boots or shoes with non-slip soles,
strong long trousers and work gloves. Never
operate the equipment while bare footed or
wearing sandals.
- Never use the equipment if it is damaged,
incomplete or has been modified without the
approval of the manufacturer. Never operate
the equipment if the protective equipment is
defective. Before starting up the equipment
always check that the equipment is in a perfectly
safe condition, especially the power cable, the
switch and the protective cover.
- Never disconnect or remove any protective
devices!
- Always maintain a secure footing while working.
Be especially careful when working on a sloping
terrain.
- Do not operate the equipment if you are tired
or lack concentration and after having drunk
alcohol or taken medication. Always take a work
break in due time.
- Do not use the equipment while it is raining,