Nakayama 024286, Руководство пользователя

Страница: 4 / 23

4
WWW
.N
AKAYAMA
T
OOLS
.
COM
•
Wear no-slip heavy duty work gloves to improve your grip on the brush cutter handle. Gloves also reduce the transmission
of machine vibration to your hands.
• WARNING: The cutter area is still dangerous while the machine is coasting to a stop.
• When transport, this unit must be handled carefully. Do not expose yourself or others to danger.
• Envelop the blade before storage. Keep children away from it.
• Never remove the machine’s guard.
•
Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters, furnaces, etc. Store in a
locked, well-ventilated area only.
• Never place the machine in any places where there are flammable materials (dry grass, etc.), combustible gasses or
combustible liquids.
• National regulation can restrict the use of the machine.
• Never modify a trimmer or cutter in any way.
•
Improper use of the machine can cause SERIOUS OR FATAL PERSONAL INJURY.
Kickback and Related Warnings
● Kickback is a sudden reaction to a pinched or snagged rotating wheel, ba cking pad, brush or any other accessory. Pinching
or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in
the direction opposite of the accessory’s rotation at the point of the binding.
● For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the
pinch point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel may either jump
toward or away from the operator, depending on direction of the wheel’s movement at the point of pinching. Abrasive
wheels may also break under these conditions.
● Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by
taking proper precautions as given below.
a) Never place your hand near the rotating accessory. Accessory may kickback over your hand.
b) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in
direction opposite to the wheel’s movement at the point of snagging.
c) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp
edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
Residual risks
Even if you use this power tool correctly, there are always residual risks. The following hazards may arise in connection with
the structure and manufacture of this power tool:
1. Hearing impairment if no suitable hearing protection is worn.
2. Cuts if no suitable protective clothing is worn.
3. Health damage resulting from vibration in the hands and arms if the device is used for a long period of time or is not
handled and maintained properly.
Warning! This machine generates an electromagnetic field during operation. This field may, in certain
circumstances, affect active or passive medical implants. To reduce the risk of serious injury or death, persons with
medical implants should consult their physician and the medical implant manufacturer before using the machine.
Explanation of symbols
This graphic accompanied by the words WARNING and DANGER calls attention to an act
of a condition which can lead to SERIOUS INJURY.
READ & UNDERSTAND Operator’s Manual and Safety Manual