24
Fig. 2
7
. CONNECTION OF THE SPINDLE TO THE MOTOR
CAUTION
・
Make sure your hands and all interlocking parts of the Spindle and
brushless motor are clean before connecting the brushless motor to the
Spindle. This is critical in preventing contaminants from entering the
brushless motor or Spindle.
・
When connecting the Spindle to the brushless motor, it is best to hold the
brushless motor and Spindle in a vertical position. Carefully connect by
threading the brushless motor on the Spindle and avoid mis-alignment, as
this will cause damage to the brushless motor and or Spindle drive.
Align the threads on the front end of
the brushless motor and the rear end
of the Spindle, then turn the Spindle
clockwise.
If the drive shaft of the brushless motor
does not engage the drive dog on the
Spindle smoothly, DO NOT FORCE
THEM TO SEAT. Tighten the Spindle
after rotating the Dust Proof Cover by
hand to engage the drive shaft and
the drive dog. Use the provided 36mm
wrenches for
¿
nal tightening of the
Spindle to the brushless motor.
36
Tighten
36
Turn
Transmission Clutch
Dust Proof Cover
