Nakanishi AL-M1203BS2 Скачать руководство пользователя страница 6

15

English

5

. OPERATION

Fig. 2

5 - 1  Air Filter (Fig. 2)

5 - 3  Regulator (Fig. 3)

The water, dirt and debris are separated from the 
compressed air.
The separated debris is collected in the Bowl.

 To manually drain the bowl 

Allows manual draining of the bowl before debris 
accumulates to upper limit.
Opening and closing the drain valve.

O direction

Draining.

S direction

Stop Draining.

Bowl

Drain Outlet Port

Drain Valve 

S : Stop Draining

O : Draining

Upper Limit

S

O

5 - 2  Automatic Drain Mechanism (Fig. 2)

If debris has accumulated to the upper limit of the bowl, 
or if air pressure is not applied to the bowl, the bowl will 
discharge from the Drain Outlet Port by the "Auto Drain 
Mechanism."
Connect a drain hose with a 

ȭ

6mm I.D.(Not included/

provided by the end-user) to the Drain Out Port to discharge 
the debris.

‚0

‚4

‚2

1‚0

MPa

‚8

‚6

Pressure Gauge

H : Increased

L : Decreased

Regulator Knob

Lock

Release

L

H

Fig. 3

 Lock and Release of the Regulator Knob 

Regulator Knob is equipped with Lock mechanism.

Release

Pull the Regulator Knob OUT to unlock.

Lock

Push the Regulator Knob IN to the Lock 
position.

 Adjusting Air Pressure 

Turn the Regulator Knob while watching Pressure Gauge 
increase or decrease.

H direction

Air pressure is increased.

L direction

Air pressure is decreased.

Содержание AL-M1203BS2










Отзывы: