background image

12

CAUTION

Use of dry air
Using compressed air containing excessive moisture could result in malfunction or failure 
of the Grinder and motor. If excessive moisture or condensation are found in Filter Regulator 
Bowl, it will be necessary to install a dryer and larger Air Filter on the primary side of the Air 
Line Kit to prevent and remove excessive moisture.

Draining
Be sure to drain moisture and condensation from Filter Regulator Bowl regularly to avoid 
moisture being carried to the Grinder and motor.

Installation Location
Place this Air Line Kit on a at and level surface.
If mounting on a wall, check if the wall is at, and securely mount the Air Line Kit in a horizontal 
direction.

Handling
When removing the Bowl or Oil Reservoir for cleaning, carefully remove them as not to cause 
damage to them.

CAUTIONS for STORAGE, INSTALLATION and OPERATION

Do not use the Air Line Kit where corrosive gasses, chemicals, seawater, water, oils or steam 
exist.

Do not place in direct sunlight.

Do not use where the Air Line Kit is subject to vibration or repetitive shock.

Do not use where a heat source or radiated heat exist.

To conform to " STORAGE, INSTALLATION and OPERATION " (Refer to " 6. SPECIFICATIONS ").

When opening the package, check if it includes all items listed in " Table. 1 Packing List Contents ".
In the event of any shortage, please contact either NAKANISHI (see the " 4. CONTACT US " section) or your local dealer. 

2

. BASIC PACKAGE

Table. 

1  Packing List Contents

Air Line Kit

・・

1pc.

Connection Hose (2m)

・・

1pc.

Rubber Pads

・・

4pcs.

Mounting Screws 
(Cross-Recessed Truss Tapping 
Screw : M6 x 20)

・・

4pcs.

Lubricating Oil ( K - 211 ) 70cc

・・

1pc.

Washers

・・

4pcs.

Hose Band

・・

1pc.

CKD Instruction Manual

・・

1set

Operation Manual

・・

1set

ྲྀᢅὀព᭩

INSTRUCTION MANUAL

CKD

ྲྀᢅㄝ᫂᭩

OPERATION MANUAL

Содержание AL-H1206












Отзывы: