Nakamichi NA400, Инструкция по эксплуатации

Страница: 2 / 13

To prevent a short circuit, never put or leave any metallic objects
(such as coins or metal tools) inside the unit.
Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may result in damage to
the monitor or unit.
Cleaning the connector: Wipe off dirt on the connector of the unit and
faceplate. Use a cotton swab or cloth.
WARNING
How to reset your unit
Important to know...
Maintenance
Caution
:
Adjust the volume so that you can hear sounds outside
the car
.
Driving with the volume too high may cause an accident
.
Condensation:
When the car is air-conditioned, moisture may
collect on the laser lens. This may cause disc read errors. In this case,
remove the disc and wait for the moisture to evaporate.
The illustrations in this manual are examples used to explain more
clearly how the controls are used. Therefore, what appears on the
illustrations may differ from what appears on the actual equipment.
If you experience problems during installation, consult your
Nakamichi dealer.
When you purchase external components, check with your
Nakamichi dealer to make sure that they work with your model and
in your area.
Stop the car before operating the unit.
Safety
3
Reset
2
To prevent deterioration, do not touch the terminals of the unit and
faceplate with your fingers.
1
If this unit fails to operate properly, press the reset button.
The unit returns to factory settings when the reset button is pressed.
What’s in the box
Main unit
(with sleeve)
Carrying case
(for front panel)
Disassembly tool
(2pcs)
Screw x 4pcs
Front panel
User manual
Trim plate
2 EN
Check and identify the contents of your package:
Caution
:
THIS MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT.
THIS UNIT USES A VISIBLE / INVISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE SURE TO
OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED.USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR BY
YOURSELF PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN.
How to attach/detach the faceplate
Preparation
1
2
1
2
Do not expose the faceplate to direct sunlight, excessive heat, or
humidity. Also avoid places with too much dust or the possibility of
water splashing.
Keep the faceplate in its casing while detached.
The faceplate is a precision piece of equipment and can be damaged
by shocks or jolts.
Attach Detach
Remote
control
ISO male
connector