NAiS GV42C Скачать руководство пользователя страница 373 | Manualshive

Страница: 373 / 506

NAiS GV42C Скачать руководство пользователя страница 373

Chapter 8 Applications for GVWIN

8-11

8

Simulator

About SIM Files

An SIM file is a memory file used to read and write PLC memory on the
Simulator screen.

Timing of Creating or Updating SIM File Automatically

When the GVWIN editor and the Simulator are both started up, an SIM file is
created automatically. SIM file update timing:
1. When you go to the [Tool] menu for GVWIN and select [Start Simulator] (or)
2. When screen data is sent from GVWIN (or)
3. When you go to the [File] menu for the Simulator and select [Apply GVWIN

Data]

Update occurs automatically in both cases, followed by the display of an SIM file
sheet on screen.

Names of Automatically Created SIM Files

An automatically created SIM file is saved temporarily in “\TEMP.” The following
file names are attached to these SIM files.

The memory data for items set on each

screen is saved here.

The memory data for items set on each

multi-overlap is saved here.

The memory data for normal overlaps

within each screen is saved here.

The memory data for data display set on

each block is saved here.

The memory data for data display set on

each data sheet is saved here.

The memory data for the system memory

of the screen data file is saved here.

The memory data for the buffering area

is saved here.

Scrn0010.sim

SIM

Mlib0010.sim

SIM

ScrnOv00100.sim

SIM

Dtblk0010.sim

SIM

Tyo0010.sim

SIM

System.sim

SIM

Buffer.sim

SIM

Screen number

Multi-overlap number

Screen number

Overlap number

Data block number

Data sheet number

When SIM files are automatically created, all the SIM files in the “\TEMP” folder are

deleted. If you have created a SIM file, do not save it in the “\TEMP” folder.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

«
...
371
372
373
374
375
...
»

Содержание GV42C



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов