8
Versión/Version referencia/Code ZFD014 11/07/2017
1.
Safety
Electrophoresis power supplies use high output voltages that are electrically isolated from earth
ground through a protective impedance to minimize the risk of electrical shock to the user. The
following guidelines should be observed and followed when using a power supply.
Electrophoresis power supplies have passed test for operation at temperatures between0° and
40°C, with relative humidity between 0 and 95% non-condensing.
Operating the power supply outside these conditions is not recommended by our company and
will void the warranty.
1. To ensure adequate cooling of the power supply, be sure that there is at least 6 cm clearance
around the power supply. Do not block the fan vents at the rear of the unit.
2. Always connect the power supply to a 3-prong, grounded AC outlet, using the3-prong AC
power cord provided with the power supply
3. Do not operate the power supply in extreme humidity (less than 95%) or where condensation
can short the internal electrical circuits of the power supply.
4. When taking the power supply into a cold room, the unit can be operated immediately.
However, when removing the power supply from the cold room, let the unit equilibrate to room
temperature for a minimum of 2 hours before using it.
5. Never connect a high voltage output lead to earth ground. This defeats the floating electrical
isolation of the power supply and exposes the user to potentially lethal high voltages.
This instrument is intended for laboratory use only.
This product conforms to the class A standards for Electromagnetic Emissions, intended for
laboratory equipment applications. It is possible that emissions from this product may interfere
with some sensitive appliances when placed nearby or on the same circuit as those appliances.
The user should be aware of this potential and take appropriate measures to avoid interference.
2.
Introduction
The C series Power supply has the following Technical specifications and Characteristic
features:
