10
Versión/Version referencia/Code ZFD014 11/07/2017
b.
The cursor will
flash at “U=□□□V”. Set the value of constant voltage by pressing
“▲”or“▼”button.
c.
The cursor will
flash at “I = □□□mA” when press “ENT” button. Set the value of constant
current by pressing
“▲”or“▼”button.
d.
The cursor will
flash at “P = □□□W” when press “ENT” button. Set the value of constant power
by pressing
“▲”or“▼”button. The range of power can be set from 1 to 300W.
The cursor will return and
flash at “U = □□□V” when you press “ENT” button. Set the value of
constant voltage again by pressing
“▲”or“▼”button.
e.
Power supply in Setting State now:
P
ress “RUN/STOP” button, it will enter into Operating State.
EDIT[0]
RUN!
00:01
▼
100
V
U= 100V
350
mA
I= 500mA
35
W
P= 300W
f.
Power supply in Operating State now:
Press
“RUN/STOP” button, it will stop output and return to Setting State.
g.
In Setting State, continue
to press “EDIT” button, it will enter into Editing State and display:
“SAVE [□]” → “LOAD [□]” → “T= □□:□□” → “QUIT” → “SAVE [□]”…
EDIT[ 0 ]
0
V
U= 100V
0
mA
I= 500mA
0
W
P= 300W
h.
At “SAVE □”, press “▲”or “▼” button to select number of memory program. The range of
number is from 1 to 9. Then press “ENT” button to save current method into this program.
i.
At “LOAD [□]”, press “▲” or “▼” button to select number that needed. The range of number
is from 1 to 9. Then press “ENT” button to load the current method from program.
j.
At “T= □□:□□”, press “▲”or “▼” button to set operating time.
k.
The range of timer is fr
om 1minto 99hs and 59mins. Then press “ENT” button to save it.
EDIT[ 0 ]
0
V
U= 100V
0
mA
I= 500mA
0
W
P= 300W
l.
At “QUIT”, press “ENT” button to quit Editing state, and return to Setting State.
