Version 1, May 2020
PRODUCT DESCRIPTION
Electric heating constant temperature water bath boiler is mainly used for
distillation, desiccation, concentration and warm maceration of chemicals or
biologics, it’s conventional indispensable instruments prepared in laboratories by
various universities and colleges, secondary specialized schools, scientific
research enterprises and institutions.
PRODUCT STRUCTURE
This product adopts water-trough liner which is one shot shock and extrusion
using imported stainless steel and its shell is made of high-quality cold rolled
steel and is treated with plastic spraying technology, shinny and wear-resisting.
With the electric heating pipe gripped into the water, it can heat fast and keep
high heat efficiency, low power consumption. By intellectual digital temperature
control, it will check the rise and fall of temperature so as to ensure the precision
of temperature control.
USAGE
1.The water bath shall be placed on a stable platform.
2.Add water to 50mm above the clapboard before use.
3.Connect to a power supply consistent with the requirement of this instrument
and reliably ground the grounding terminals of the socket of power supply used.
4.Open the power switch and the power supply indicator light is on. Set the
required temperature, and the temperature controller begins to display the
temperature inside the working chamber.
5.Refer to the instructions of temperature controller for digital temperature
controller and intelligent temperature controller.
6.After the set temperature is reached and it is automatically put under a
constant temperature for half an hour, it will be put in the sample tube. The
experiment is completed. Then, close the power switch and take out the sample
tube.
SAFETY PRECAUTIONS
1.The power supply must be in line with the voltage required by the product. The
power socket shall be a three-hole socket. Favorable grounding protection must
be provided.
2.During water filling, do not let the water flow in the control cabinet to prevent
electric leakage.
3.Before use, add water 50mm until the water reaches above the clapboard
before use first. Then connect to power supply and heat. It is not allowed to heat
with insufficient water.
4.During use, do not touch the heating pipe by your hands to avoid being
scalded.
5.After use, timely discharge the water, dry it and keep it clean in order to extend
the service life.
