Page 34
ENGLISH
Version 1, September 2023
User’s manual for analytical balances
Percent weighing
Density determination (gravity kit needed – optional)
1. Enter percent weighing mode. Put the contrast
target sample on the balance pan, for example, 2
pcs of screw.
2. Save the sample weight. “100.00” (100%) is
shown.
3. If you put 1 screw on the balance pan, “50.00”
(50%) is shown.
4. If you put 4 screws on the balance pan,
“200.00” (200%) is shown.
1. Enter density determination mode
2. -dEn-0- close density weighing
3. -dEN-1- open solid density weighing
4. -dEN-2- open liquid density weighing
5. Save settings. Display shows and “W1”
6. Enter density determination mode
