6
Nagra –
MPS
Installation
Positioning
In order to protect against the risks of fire and electric shock, please keep this
device away from rain and humidity, use exclusively indoors.
The Nagra MPS must rest on a stable support. We recommend that you use the
anti-vibration support, Nagra VFS, Vibration Free Support, developed by Nagra
consisting of isolated solid aluminum plates using the same silicon base damping
material as the Nagra CD mechanics. Please note that the MPS needs four spikes
and thus is not compatible with older VFS (before 2012). Feel free to contact your
Nagra dealer for more information.
it is not advised to place other Nagra units above or below the MPS, as it features
a large transformer. It is preferable to use a separate shelf for other devices.
Connection block
1.
Main switch
I
for On /
O
for Off
2. Fuse holder
3. IEC socket for mains power cable
4. 12 V outputs for Nagra DC power cables
5. REM
1/8” jack input for home automation
6. AMP
1/8” jack output for triggering external components (marked AMP for Amplifiers)
7. DC output connector and voltage selector for BPS
1
2
3
4
5
6
1
2
7
