Nagman 650-H, Руководство пользователя

Страница: 20 / 23

NAG/IM/650-H/01/22
20
SPECIAL NOTES / INSTRUCTIONS:
Following special notes / Instructions are to be followed
strictly, for trouble free & safe operation.
1. All the parameters are factory configured. Though there
are 5 levels of controller parameter configuration, users
are strictly advised to change “SET point” alone & “UNIT”
(if required) functions which is shown in procedure.
2. MEDDLING through other function / parameter may lead
to malfunction of the unit, such as improper display
indication, over heating and may also lead to physical
hazards.
3. If you get struck during configuring any of the user
allowed parameters, (“SET point” & “UNIT”) simply come
out of the configuration procedure without entering “ P ”
key.
Switch Test
 Connect the output of thermostat switch to the switch
test sockets using the test probes supplied.

If the thermostat switch is “Normally Closed”, the LED
indication will glow and will stop glowing when the
switch changes its state.

If the thermostat switch is “Normally Open”, the LED
indication will not glow initially and will glow when the
switch changes its state.