NAG/IM/650-H/01/22
15
This instrument must be plugged into a 230V AC,
50Hz (Optional 115V AC, 60Hz), electric outlet only.
The power cord of the instrument is equipped with a
three-pin grounding plug for protection against
electrical shock hazards. It must be plugged directly
into a properly grounded three-pin socket. The
receptacle must be installed in accordance with local
codes and ordinances. Do not use an extension cord
or adapter plug.
If supplied with user accessible fuses, always replace
the fuse with one of the same rating, voltage, and
type.
Always replace the power cord with an approved
cord of the correct rating and type.
Turn off the Instrument immediately, during main
power fluctuation. Power
bumps from brown-outs
could damage the instrument. Wait until the power
has stabilized.
Do not remove the fuse box from the socket until the
power cord has been disconnected.
If the fuse blows immediately after you have
replaced them, the calibrator should be returned to
the manufacturer for service.
