Adress: Mecidiye Mah. Uzundere Artvin Cad. No: 70
34930 Sultanbeyli / İSTANBUL - TÜRKİYE
Phone : +90 216 398 46 10 / 398 07 46 Fax: +90 0216 398 11 36
This picture belongs to NAGEL
MAKİNE MOT
OR İM. SAN. ve
TİC.
A.Ş. It cannot be published or copied without permission
INSTRUCTION MANUAL
EN ISO 9001:2015
No : 1740528
ÖZGEN
POSSIBLE MALFUNCTION REASONS AND SOLUTIONS
Page :29
POSSIBLE MALFUNCTIONS
POSSIBLE REASONS
SOLUTIONS
Brake adjustment is not suitable.
Abrasion of one of ducts of pully
Not having appropriate rope stress
adjustment
Bringing rope stress adjustment to the same
level
The motor operating in reverse
Phases connected in reverse
Phases should be replaced and normal
rotation should be ensured.
The motor leaking oil (oil leakage
from motor bearings)
Much oil might be put.
Attention should be paid for motor oil level.
The machine leaking oil (oil leakage
from machine bearing on driving
pulley side)
Putting much oil than required amount.
Attention should be paid for the machine’s oil
rod level.
Shaft- Coupling distance should be adjusted.
The machine straining
The machine might not be placed on a
smooth ground.
Fixing bolts might be squeezed much.
The machine should be taken out of load,
adjusted in a balanced way and fixed and it
should be checked whether is can rotate
easily by using hand wheel.
The machine should be taken out of load, bolts
should be adjusted.
Brake making noise or not opening
