Nagel 2S Trimmer, Руководство по установке, Страница: 8 / 22

© Ernst Nagel GmbH 2S Trimmer Installation Manual en.doc Rev.1.0. 16.11.2010
8
4. Installation
(continued)
4.4 Preparing the STR
(continued)
Fig. 5 Fig. 6
Fig. 7
Step Action Remarks
3. Loosen Upper Nuts Loosen both Upper Nuts (C) of the wheel bolts at the
Front by using a wrench 24mm (Fig. 5).
4. Adjust height STR Adjust the height of the STR by turning the wheel bolts
(D) by using a wrench 24mm (Fig. 6).
5. Check height STR Check if theFront cover of the STR is at close as possible
to water level (Fig. 7)
6. Tighten Upper Nuts After checking the height of the STR tighten the Upper
Nuts (C) (Fig. 5).
C
D