- 42 -
Software Installation Examples
Before installing the driver programs, please refer to each directory that contains a README file, which provides detailed
installation instructions, or to execute the HELP8139.EXE help file viewer in DOS. The utility will then present with a
screen showing the information about how to install the network driver. Driver needed for the
adapter to work with the operating system.
5-9. Realtek 8139 LAN Driver Installation Procedure:
Please note: The LAN Driver installation has to be done after completing Win 95/98/2000 installation.
When completed with the WIN 95/98 installation, please click “My Computer” to start your LAN driver installation
(procedure listed as below):
My Computer
è
Control Panel
è
System
è
Device Manager
è
? Other Devices
è
?
PCI Ethernet Controller
è
Properties
è
Driver
è
Update Drive
è
Yes (Recommended)
è
Next
è
Other Locations
è
Browse
è
A:\Rtsnt.100\Exe\Win95
è
OK
è
Finish
After finishing the above procedure, the screen will show “copy the files from?”
Please type A:\Rtsnt.100\Exe\Win95=> OK and select “OK”, the system will ask you to insert Win95 driver diskette to
update new driver.
After finishing the above steps, please shut down your system and re-boot the system.
Appendix A: FLASH Memory Utility
Using this utility to update the system BIOS from a disk file to the on board Flash memory. Be aware the improper
change of the system BIOS will cause the system to malfunction.
Using utility as follows:
1. nsert the FLASH memory BIOS utility distribution floppy diskette in drive A:
2. At the DOS prompt, type A:\> F82725 xxxx.ROM <Enter>
