background image

PEM-500R Receiver

Maximum Audio Output Level 

20 mW

Minimum Audio
Output Load Impedance

16 

RF Sensitivity

2.5uV (-100 dB/12 dB SINAD)

Squelch Threshold 

< -90 dB

Spurious Rejection

> 55 dBc

Audio Output Connector 

3.5 mm Stereo (Tip=left, Ring=Right, 
Sleeve=ground)

Controls

Volume adjust;  limiter ON/OFF, power 
ON/OFF, STEREO/MONO select switches; 
16-position channel selector switch

Indicators 

Two-color (red/green) 3-way unit 
ON/Signal/Low Battery LED 

Power Requirements

9V alkaline battery

Current Drain

< 40 mA

Battery Life

Up to 6 hours, volume dependent

Antenna

Internal

Dimensions

4.2" x 0.9" x 2.6" (106 x 23 x 66 mm)

Weight

2.85 oz (80 Kg)

SERVICE

(U.S.)

Should your Nady PEM-500 Wireless Personal In-Ear Monitor System require

service, please contact the Nady Service Department via telephone at (510) 652-
2411 or e-mail to service@nadywireless.com for a Return Authorization (R/A)
Number and a service quote (if out of warranty). Make sure the R/A Number is
clearly marked on the outside of the package that you send in and enclose a
cashier's check or money order (if not prepaid with a credit card).  Ship the unit
prepaid to: Nady Systems, Inc., Service Department, 6701 Shellmound Street,
Emeryville, CA 94608. Include a brief description of the problem you are
experiencing.

The warranty card enclosed with this system contains additional valuable
warranty and service information. Keep it in a safe place for possible future
reference.  Do not attempt to service this unit yourself as it will void the warranty.

(International)

For service, please contact the Nady distributor in your country

through the dealer from whom you purchased this product.

15

Operating Frequency Range

696-865 MHz, country dependent

Modulation

Mono or stereo (MPX with pilot tone), FM: F3E
+/- 60 KHz, nominal

Audio Frequency Response

50 ~ 12,000 Hz

T. H. D.

< 1%

Signal-to-Noise Ratio

> 80 dB, with proprietary companding noise 
reduction

Operating Range

Up to 300 feet typical (depending on site 
conditions)

PEM-500T Transmitter

RF Output Power

Max. 50 mW (country dependent)

L/R Audio Line Inputs

Input impedance

600 

Nominal Input Level

0 dBm

Max. Input Level  

+6 dBm

Headphones Out Power 

100 mW max. @ 32 

190 mW @ 16 

Spurious Emission

> -55 dBc

Frequency Stability

+/- 100 PPM

Controls  

Power ON/OFF, STEREO/MONO, and 
channel select switches; input level, 
headphones monitor volume controls

Connectors 

1/4" stereo headphones monitor out, 1/4" 
TRS balanced mic input, balanced XLR L& R 
line input, and 2.1 mm barrel-type DC input 
jacks; BNC antenna socket

Indicators 

Power ON LED; channel and 10-segment L/R 
audio input LED displays

Antenna  

1/4 wave rigid detachable, BNC mount

Power Requirement

14V, 500mA, AC adapter supplied 
(UL/CSA approved 120VAC or CE approved 
230VAC)

Dimensions

8.27" x 9.13" x 1.73" (210 x 232 x 44 mm)

Weight 

2.98 lbs (1.35 Kg)

SPECIFICATIONS

14

Содержание PEM-500










Отзывы: