S4600-24X2CInstallation Instruction Manual
3 First power-on and start the switch
NADDOD Pte. Ltd.
23
operating systems, the “bits per second” may be described as the “Baud rate”; and the “data flow
control” may be described as “traffic control”.)
4. After setting the parameters of serial port, click the button of “OK”, the system will enter the
hyperterminal interface shown in the following figure.
Figure 3-4
Hyperterminal interface
5. Select the [Files/Properties] menu item in the dialog box of hyperterminal properties, and enter the
window of properties. Click the tab of “Settings” in the window of properties, enter the window of
property settings (as shown in the following figure), select the terminal simulation as VT100 there,
and click the button of <OK> after finishing the selection.
