manualshive.com logo in svg

NAD T785, Руководство пользователя

Поделиться
Скачать
NAD T785 Скачать руководство пользователя страница 50

AMPLIFIER SECTION

 

Power output Stereo Mode 

145W (21.6dBW) (8Ω within rated distortion) 

 

IHF dynamic power; 8 Ω 

230W (23.6dBW)

 

IHF dynamic power; 4 Ω 

320W (25.05dBW)

 

Power output Surround Mode 

7 x 120W (20.8dBW)

 

Total harmonic distortion at rated power 

<0.08%

 

IM distortion at rated power 

<0.08%

 

Damping factor, 8 Ω  

>60

 

Input sensitivity and impedance  

330mV/50KΩ

 

Frequency response 

± 0.8dB (ref. 1kHz, 20Hz – 20kHz)

 

Signal/noise ratio 

>93dB (ref. rated power at 8 Ω, A-WTD)

 

Signal/noise ratio 

>83dB (ref. 1W at 8 Ω, A-WTD)

PREAMPLIFIER SECTION

 

Input sensitivity and impedance 

350mV/50KΩ

 

Frequency response 

± 0.5 dB (20Hz – 20kHz)

 

Signal/noise ratio 

>88dB (ref. 2V, A-WTD)

 

Input sensitivity 

330mV (ref. 2V)

 

Maximum output level 

>3V

TUNER SECTION

AM SECTION

 

Tuning range 

530kHz -1710kHz (120V version, 10kHz steps)

 

 

531kHz -1602kHz (230V version, 9kHz steps)

 Usable 

sensitivity 

30dBu

 S/N 

ratio 

38dB

 

 Total Harmonic Distortion 

<3%

 

Loop sensitivity 20dB S/N 

66dBu

FM SECTION

 

Tuning range 

87.50MHz -108.50MHz

 

Usable sensitivity, MONO 

< 16.1dBf

 IHF 

(3% 

THD) 

18dBu

 

S/N Ratio MONO 

60dB

 

S/N Ratio STEREO 

55dB

 

Total Harmonic Distortion, MONO 

0.25%

 

Total Harmonic Distortion, STEREO 

0.5%

 Channel 

Separation 

40dB

 

RDS decode sensitivity 

28dBu

PHYSICAL SPECIFICATIONS 

 

Unit Dimensions (W x H x D)  

430 x 180 x 382mm (Gross)*

 Net 

Weight 

25.5kg

 Shipping 

Weight 

 

30.7kg

* - Gross dimensions include feet, volume knob and extended speaker terminals.

Specifications are subject to change without notice. For updated documentation and features, please log onto 

www.NADelectronics.com

 for the latest 

information about T 785.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS is a 
registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.  © 1996-2009 DTS, Inc. All Rights Reserved.

Manufactured under License from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

The XM name, XM Ready and related logos are registered trademarks of XM Satellite Radio Inc.  

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. 
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. 
Reverse engineering or disassembly is prohibited.

REFERENCE

SPECIFICATIONS

50

ENGLISH

Содержание T785

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды