MANUAL SCAN
This option allows you to directly tune to a desired channel and include it
in the service list (if not yet available at the time). You can also use manual
scan to assist you in positioning the DAB antenna for best reception of the
desired channel.
1
While listening to a DAB broadcast, press front panel’s [TUNER MODE]
button and then [TUNE
/
] to select “Manual Scan”. Press
[ENTER]. The current channel and frequency are shown in the upper line
of the VFD. The “bars” at the lower line of the VFD indicate the signal
strength level of the current channel.
2
To select other channels, toggle [TUNE
/
] to step through the
channel list. Release [TUNE
/
] when you have arrived at your
desired channel. Channel and frequency are shown in the upper line
of the VFD. The “bars” at the lower line of the VFD indicate the signal
strength level of the current channel. To improve the reception of the
selected channel, adjust or reposition the DAB antenna until the best
reception is indicated.
3
Press [ENTER] to tune the selected channel.
NOTE
The number of ensembles and stations that could be scanned will vary
depending on your location.
PRUNE LIST
There maybe situations wherein certain stations become inactive. The
“Prune List” option enables the deletion of these inactive stations in the
service list.
1
While listening to a DAB broadcast, press front panel’s [TUNER MODE]
button and then [TUNE
/
] to select “Prune List”.
2
Press [ENTER]. Any inactive stations are automatically deleted.
RESET
The “Reset” option allows the connected (and separately sold) NAD DAB
Adaptor DB1 to be reset to its factory default settings.
1
While listening to a DAB broadcast, press front panel’s [TUNER MODE]
button and then [TUNE
/
] to select “Reset”.
2
Press [ENTER]. “Reset? No” will be shown in the lower line of the VFD.
Press [TUNE
/
] to switch to “Reset? Yes” option.
3
To select “Reset? No” or “Reset? Yes”, press [ENTER] while at the desired
option. Selecting “Reset? Yes” will cause the DB1 to be reset to its factory
default settings.
INFORMATION SETTINGS
While listening to a DAB broadcast, the type of information displayed in the
lower line of the VFD can be varied. Toggle front panel’s [INFO] button to
step through the following display options:
Station Name
DLS
Channel and Frequency
Ensemble Name
Program Type
Time and Date
Audio Signal information
Error Rate
STATION NAME
The name or identification of the DAB broadcast station is shown. This is
the default display.
DLS
Dynamic Label Segment (DLS) is the scrolling text supplied by the
broadcasting station. It may contain information on music titles or details
regarding the program or station.
CHANNEL AND FREQUENCY
The channel and frequency of the currently tuned DAB broadcast are
displayed.
ENSEMBLE NAME
The name of the ensemble that is broadcasting the program is displayed.
PROGRAM TYPE
This is a description of the type of broadcast supplied by the station, such
as Pop, Rock, Drama and the likes.
TIME AND DATE
The current time and date as supplied by the DAB station are displayed.
AUDIO SIGNAL INFORMATION
Displays the bit rate and audio type (stereo, mono or joint stereo)
as transmitted by the DAB broadcast provider. These are set by the
broadcaster to suit the type and quality of material being transmitted.
ERROR RATE
This displays the digital error rate (0 to 99) of the currently tuned channel
- the lower the figure, the better the quality of the received broadcast.
ABOUT THE iPod INPUT FEATURE
The T 755 is equipped with a data port in the rear panel where an optional
“NAD IPD 1 Dock with iPod” (NAD IPD 1) can be plugged in. With the NAD
IPD 1 linking the T 755 with your own iPod player, you can enjoy listening
to your favorite tracks and playlists as well as view applicable still image and
video playback.
OPERATION
USING THE T 755 – AM/FM/DB/iPod
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
