NAD T550, Руководство пользователя

Страница: 18 / 40

PAGE 18
CONNECTIONS
Connecting to Optional Equipment
Enjoying Dolby Pro Logic Surround Sound
Front
speaker
(Left) Front
speaker
(Right)
Rear speaker
(Right) Rear speaker
(Left)
Center
speaker
To Audio Input
TV
Audio cable
Video cable
Connection example
Amplifier equipped
with Dolby Pro
Logic Surround
To Video Input
To ANALOG
Audio Out
To Video Out
Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3)
decoding. If you A/V receiver has a Dolby Pro Logic decoder. Refer to the following connecting diagram.
Connect one or two
rear speakers.
The output sound from
the rear speakers will
be monaural even if
you connect two rear
speakers.
With a receiver equipped with Dolby Digital (AC-3)
Connect the equipment the same way as described in “Enjoying Dolby Digital (AC-3) Sound” on the previous
page.
Refer to that receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround
sound.
Warning
Do not set the Audio Output of this DVD player to “Stream/PCM” unless you are connecting either the coaxial or
optical digital audio jack of this DVD player to an AV decoder that has the Dolby Digital (AC-3) decoding function.
Do not connect both the coaxial and optical sockets to the same decoder. High volume sound may damage your
hearing as well as the speakers.
Note
Change the setting of speaker output in Initial Setup, from Multichannel to Two channel. (Refer to page 34)