condition
poSSible cauSeS
poSSible SolutionS
No power.
The power cord is disconnected.
•
Plug the power cord into the wall outlet
securely.
•
The power is on, but the DVD player does
not work.
No disc is inserted.
•
Insert a disc. (Check that the DVD or, audio
CD indicator in the display window is lit.)
•
No picture.
The TV is not set to receive DVD signal
output.
•
Select the appropriate video input mode on
the TV.
•
The video cable is not connected securely.
•
Connect the video cable securely.
•
Unit output setting and TV resolution
capabilities mismatch.
•
Check TV capability.
Check mode of connections (eg. S-Video,
Component etc.).
Check unit Resolution setting according to TV
capability and mode of connection.
•
•
•
No sound.
The equipment connected with the audio
cable is not set to receive DVD signal output.
•
Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
•
The power of the equipment connected with
the audio cable is turned off.
•
Turn on the equipment connected with the
audio cable.
•
The AUDIO options are set to the wrong
position.
•
Set the Digital Audio Output to the correct
position, then turn on the DVD player again
by pressing POWER.
•
The DVD player does not start playback.
An unplayable disc is inserted.
•
Insert a playable disc. (Check the disc type,
color system and regional code.)
•
The rating level is set.
•
Cancel the rating function or change the
rating level.
•
The remote control does not work properly.
The remote control is not pointed at the
remote sensor on the DVD player.
•
Point the remote control at the remote sensor
of the DVD player.
•
The remote control is too far from the DVD
player.
•
Operate the remote control closer to the DVD
player.
•
The remote control batteries are dead.
•
Replace the remote control batteries.
•
.
REFERENCE
troubleShooting
6
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
T535_eng_OM_v07.indd 26
16/7/07 08:12:28
