Nacecare TGB 2120, Инструкция пользователя

Страница: 6 / 28

6
www.numatic.co.uk
The U-bend in the hose prevents water spillage when the vacuum is switched off.
Refit vacuum hose to the floor tool when finished.
Hose U-bend Clip
Note: DO NOT push the vacuum hose
onto the floor tool with the floor tool
in the raised position.
Machine Set-up Guide
The floor tool design incorporates a safety knock-off feature, this allows it to safely
disengage from its mounting should it become caught on an obstruction during
forward movement.
Make sure you do not over tighten the retaining knobs.
Break-away Floor Tool
Fitting the Floor Tool
Note: Raise floor tool before driving to the cleaning area.
The machine will not operate in reverse with the floor tool lowered.
Lower the floor tool.
Slide floor tool onto bracket. Tighten retaining knobs to finger tight and
attach hose.
Raise the floor tool.