Figure 2-1
Drill Template
Note:
Drill the cable hol
e if planning to route the cable
through the ceiling/wall.
Note:
The supplied screw package contains self-tapping
screws, and
plastic anchors
.
For cement wall/ceiling,
plastic anchors
are
required to
mount
the camera. For wooden
wall/ceiling, self-tapping screws are required.
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
1
1
1
A
4
.
Route the cables and fix the mounting base on
the ceiling with
three screws.
Figure 2-
2
Fix the Mounting Base
4.
Adjust
the camera viewing angle (aim).
1).
Loosen the set screw.
2).
Hold the enclosure to adjust the camera's viewing angle.
3).
Tighten the set screw.
Figure 2-3
Adjust Viewing Angle
Pan:
0° to 360°
Tilt:
0° to 75°
Rotate:
0° to 360°
