Nace PRO-18, Руководство пользователя

Страница: 8 / 21

8 PRO-18 USER MANUAL REV A
CHAPTER 5 BACK PANEL
1. RVRB:
a. External on/off foot switch for reverb.
b. Normally enabled and controlled via the Front Panel Reverb control.
c. Foot switch is not included.
d. Recommend item P-H477 from Antique Electronic Supply
2. BOOST:
a. External on/off foot switch controls pre-amp level to boost from
rhythm to lead.
b. Levels can be set up via the gain and/or V-power* controls.
c. Normally enabled for lead.
d. Foot switch is not included.
e. Recommend item P-H477 from Antique Electronic Supply
3. RECORD:
a. A line out from the pre-amp to facilitate recording sessions and
other functions. Use a ¼ inch stereo plug for balanced output and a ¼
inch mono plug for single ended output.
b. Emulates the SPL of a Celestion Greenback.
c. Use a high quality guitar cable or mic cable for best results.
d. Turn the Mater Volume fully counter clockwise when using.
e. Cable is not included.
4. FX SEND/FX RETURN:
a. Output from pre-amp (no internal reverb) to facilitate the use of
external audio processors including foot pedals.
b. FX SEND may be used as a pre-amp output to other amplifiers.
c. FX RETURN may be used as an input from other amplifiers.