Nabtesco RV E Series, Руководство по эксплуатации

Страница: 10 / 90

Chapter 1 About safety
2
1.3. General precautions
This section describes general precautions for safe use of this product. For precautions concerning
transportation, installation, operation, maintenance, and inspection, be sure to confirm the contents of the
relevant chapter.

Do not modify or disassemble the reduction gear in a manner not described in this manual. This
could cause injury or damage to the reduction gear.

Transportation, installation, operation, maintenance, and inspection of the reduction gear must be
performed by personnel who fully understand this manual. The person in charge of the operation
and manager of the reduction gear must not allow anyone without an understanding of the contents
of this manual to operate it. This could cause injury or damage to the reduction gear.

Do not put your fingers or any object into the opening of the reduction gear. If a belt or chain is used
for connection of the drive sections, do not put your fingers or any object into the clearance of the
protective cover, etc., as it could cause injury.

If any abnormalities or damage to the reduction gear are found, stop the operation immediately.
Incorrect motion could cause injury.

The reduction gear could become extremely hot during operation. After stopping the operation,
never touch the reduction gear until it is completely cooled. Touching the reduction gear could cause
burns.

Handle the lubricant according to the instructions given in this manual. Failure to do so could impair
your health.

This reduction gear is not filled with lubricant. Fill the reduction gear with an appropriate amount of
Nabtesco-recommended lubricant before use. Failure to do so could cause damage to the reduction
gear.

Return the tools and other necessary items to the specified location after use. If a tool, bolt, nut, or
other foreign object is trapped in the system, it could cause damage to the reduction gear.

Avoid excessive impact or vibration of the reduction gear Failure to do so could cause damage to
the reduction gear.
Note