Nabtesco RV C Series, Руководство по эксплуатации

Страница: 27 / 90

Chapter 4 Preparations for installation
19
Made in Japan
4.3. Unpacking
Check the following points when unpacking.

Before using this product, check the contents of the packing box and confirm that all the ordered
items are included.

Check the top and bottom direction of the packing box and unpack it.

When transporting the reduction gear, take extra care so that it will not fall down or topple over. A fall
of the reduction gear could cause injury to the workers or damage to the reduction gear.

Before using this product, check the contents of the packing box and confirm that all the ordered
items are included. If an incorrect part is installed, it could cause injury to the workers or damage to
the customer’s device and the reduction gear.

If it is left upside down, it could cause damage to the reduction gear.

When unpacking, the internal parts of the reduction gear remain exposed. Take extra care so that no
foreign matter adheres to the reduction gear when it is installed in the customer’s equipment and
filled with lubricant. If foreign matter adheres, it may lead to deterioration of reduction gear
performance and also to deterioration of durability or premature damage.

The reduction gear is coated with rust prevention oil before shipping. Therefore, if it is used as it is,
the rust prevention oil could ooze from the bolt hole or flange mating face during operation. In
addition, the rust prevention oil makes the reduction gear slippery. Wipe it off as necessary before
use.
4.3.1. Checking the shipping label
Check the shipping label to confirm that it matches the product you have ordered.
Fig. 4-8
Note
Important
Shipping label
Example
Bottom
Top
Nabtesco Corporation
型式 ＲＶ−４０Ｅ−１０５
品目 Ｐ３５Ｅ００３Ｄ００
Ｓ/Ｎ Ｒ０４０-２Ｅ３０００１
ｲﾝﾌﾟｯﾄｷﾞﾔ ｷｬｸｻｷ