10
Reversing the door
The side at which the door opens
can be changed, from the right side
(as supplied) to the left side, if the
installation site requires.
When reversing the door,
the appliance must not be connected
to the mains. Ensure that the plug is
removed from the mains socket.
When required, tilt the refrigerator
back in order to gain access to the
base, you should rest the appliance
on soft foam packaging or similar
material to avoid damaging the
backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
Different models may correspond to
different pictures. Models will be
written in the picture. If some parts
are not shown in the picture, please
ignore the relevant description.
1. Stand the refrigerator upright.
Open the upper door to take out all
door racks (to avoid racks damaged)
and then close the door.
Warning!
Tools you will need
●
2.Remove part
loose part
from
the top right side of refrigerator.
3.Remove screws
and hinge
.When the refrigerator with
display on door, you need to pass
connector
through the hole of
hinge
(Please hold upper door by
hand when installing).
①,
②
③
①
②
②
.
Not provided
8mm socket wrench
Thin-blade screwdriver
8mm wrench
Cross-shaped screwdriver
Door racks
MODEL WITHOUT DISPLAY
①
screws
Special flange
Upper hinge
②
MODEL WITH DISPLAY
①
screws
Special flange
Upper hinge
Electrical connector
②
③
①
screws
Self-tapping
Upper hinge cover
②