Sliders Electrical Manual
NABCO
ENTRANCES INC www.nabcoentrances.com
- 10
Holding Beams (Activation—Hold Open)
The Holding Beam is a factory-installed unit consisting of an emitter, detector and control box. They are
flush mounted in door frames and/or jamb tubes, facing each other along the threshold. A pulsed, infrared
light beam is continuously transmitted across the door opening. Interruption of the beam will switch the
White holding beam input wire to Red (Common). This will cause the system to re-activate and hold open
until the interruption is cleared.
13
Y
e
llo
w
12
G
ray
11
Y
e
llo
w
10
G
ray
9
Y
e
llo
w
8
Bl
ue
7
Y
e
llo
w
6
Bl
ue
Brown
Green
Blue
Red
Blue
Brown
Black
Blue
Green
Red
White
Red
Orange
Yellow
Jacket color
Connect
Each Terminal
the Same
Braided
Shield
Plastic Conductor
Optex Controller and One
RCVR & One TRANS
PT. NO. 149710-01
EMTR 1
Gray
Blue
RCVR 2
RCVR 1
Blue
EMTR 2
Gray
Brown
Red
Optex OS-10C
Controller
Red
Term # & Color
Not
used
Exterior
Motion
Sensor
Interior
Motion
Sensor
Panic
Breakout
Switch or
Plug with
Blue Jumper
connects
here.
Panic
Breakout
Switch or
Plug with
Blue Jumper
connects
here.
Panic
Breakout
Switch or
Plug with
Blue Jumper
connects
here.
PN 15-10288
DN 0004
Terminal #6
Terminal #1
Terminal #13
Terminal #5
Optex OA-10C Beams on a GT-1175
Wiring Diagram for Holding Beams
(U04 and Higher)
