NA DigiNet 416, Руководство пользователя

Страница: 14 / 22

On source loss:
By pressing the " On source loss " section, a new window will pop up.
When " Hold values " setting is chosen, after source loss there is no action at all, old
data remains in output
When " Blackout after :" setting is chosen, after DMX source loss the last value will not
be held and there will be a "blackout" (after delay, drop all DMX channels to 0).
When " Stop DMX " setting is chosen, after source loss the DMX signal will be disabled
(after delay, stop DMX generation at all - fixtures doesn't see DMX anymore and can
react accordingly by themselves).
Source loss timeout:
By pressing the " Source loss timeout " section, a new window will pop up.
Here you can set the source loss timeout value. This setting will change the time after
which the DigiNet will start the blackout or stop DMX output on source loss.
You can put a value from 5 to 120, which means from 5 to 120 seconds.