03009
TIME-DELAY SWITCH
(Rail mounting)
USAGE AREAS
• Stairway space areas (Houses, offices, etc.)
CAUTIONS FOR USAGE & MOUNTING
• Mounting of the product must be done by an electrician.
• Turn off the network before mounting.
• Use 10A fuse to the supply input.
• Mount the device to smooth surface.
SPECIFICATIONS
For further information, please call :
0 800 261 78 05
* Short-circuit protected
* Suitable for illuminated light switch
MOUNTING SCHEME
(L) Line, (LS) Lamp, (N) Neutral, (B) Button,
Do the mounting by following instructions below.
Automatic-continuous switch
When the switch turns to “Automatic” position, the device will
operate by every push.
Automatic-continuous switch
When the switch turns to “Countinuous“ position, the device will
operate continuously. There is no need to puss button.
When the arrow turns to (+) direction, operation period/time will
increase.
When the arrow turns to (-) direction, operation period/time will
decrease.
TROUBLESHOOTING
N
LS
L
B
Line
Button
Neutral
1 min.
2 min. 3 min. 4 min.
-
+
5 min.
2 sec.
Time setting
[email protected] • www.na-de.com.tr
MALFUNCTION
CAUSE
SOLUTION
After supply voltage the system,
if the fuse turns off.
The device starts to operate itself
The device does not operate
The device turns off itself
Bad wiring
Bad wiring
Bad wiring
Factory adjustment
is at minimum time
Check the wiring
Check the wiring
Check the wiring
Change the time period
µ
230-240V~ 50/60 Hz
10A
Min. 2sec
±
1sec. - Max. 5min.
±
1min.
IP20
CLASS II
2000W
800W
Operating voltage
Contact current
Time setting
Protection Class
Max Watt
KK-03009_150505_TR/EN_00
TS EN
60669-2-3
