background image

 

 

Thank you for purchasing N1C.L4850EBM2U, N1C.L48100EBM3U Lithium 
battery module. Please read this manual before you install the battery. 
Follow the instruction carefully during the installation process.

 

To receive full 

warranty benefits and information register your product at https://lithium-
ion-ups.com/warrantyregistration/

 

 

1.

 

Safety Precautions 

  Reminder 

1). It is very important and necessary to read the user manual carefully 

before installing or using the battery. Failure to do so or to follow any of 
the instructions or warnings in this document can result in electrical 
shock, serious injury, or death, or can damage the battery, potentially 
rendering it inoperable. 

2) If the battery is stored for a long time, it is required to charge them every 

six months, and the SOC should be no less than 90%; 

3) Battery needs to be recharged within 12 hours, after fully discharged; 
4) Do not expose cable outside; 
5) All the battery terminals must be disconnected for maintenance; 
6) Please contact the supplier within 24 hours if there is something 

abnormal. 

7) Do not use cleaning solvents to clean the battery; 
8) Do not expose battery to flammable or harsh chemicals or vapors; 
9) Do not paint any part of the battery, include any internal or external 

components; 

10) Do not connect the battery with PV solar wiring directly; 
11) The warranty claims are excluded for direct or indirect damage due to 

the items above. 

12) Any foreign object is prohibited to insert into any part of the battery.

 

Содержание LR Series





















Отзывы: