N-Tron 710FX2 Series, Руководство пользователя и инструкция по установке

Страница: 167 / 170

(Revised 2012-05-01
Page 167 of 170
Appendix A. XML Settings File Example
<! -- Overview of XML settings for N-TRON switches -- >
<!
-- XML settings can be downloaded to a switch to configure the switch. XML settings cover a
subset of the settings available through a web browser. -- >
<!
-- There are several top level configuration sections. Each section is optional.
<SystemConfiguration>
<Switches/>
<Administration/>
<IPConfiguration/>
<Users/>
<Ports/>
<DHCPServer/>
<MACSecurity/>
</SystemConfiguration>
--
>
<
SystemConfiguration version ="1" minSwVer ="3.4.2">
<! -- The minSwVer attribute is optional. If present, the XML settings are ignored if the
switch software version does not meet the minimum version requirement -- >
<! -- ______________________________________________________________________________________ -- >
<! -- The Switches block is optional. If present, the model name of the target switch must
be in the list for the file to be processed. -- >
< Switches >
< Switch minSwVer ="3.2.10"> 708TX </ Switch > <! -- If the minSwVer attribute is present, it
overrides the minSwVer attribute of
SystemConfiguration. --
>
< Switch > 7506GX2 </ Switch >
</ Switches >
<! -- ______________________________________________________________________________________ -- >
<! -- Administration -- >
< Administration >
< SwitchName > myname </ SwitchName > <! -- optional -- ><! --255 character limit-- >
< SwitchLocation > mylocation </ SwitchLocation ><! -- optional -- ><! --255 character limit-- >
< SwitchContact > mycontact </ SwitchContact > <! -- optional -- ><! --255 character limit-- >
</ Administration >
<! -- ______________________________________________________________________________________ -- >
<! -- IP configuration -- >
< IPConfiguration >
< Mode > static OR dhcp </ Mode > <! -- Mode must be static or dhcp -- >
<! -- If dhcp mode, these elements are the "Fallback" Address, Subnet, and Gateway.
Note: For an IP address of 192.168.1.201, there is no fallback address. -- >
<! -- All IP addresses have a 15 character limit (xxx.xxx.xxx.xxx) -- >
< Address > 192.168.1.222 </ Address > <! -- 15 character limit -- >
< Subnet > 255.255.255.0 </ Subnet > <! -- 15 character limit -- >
< Gateway > 192.168.1.1 </ Gateway > <! -- 15 character limit -- >
<! -- If dhcp mode, this is the dhcp client id -- >
< ClientID >
<! -- Use one of the elements (MACAddress, SwitchName, OtherText, OtherHex).
MACAddress and SwitchName use current switch values. -- >
< MACAddress />
< SwitchName />
< OtherText > myClientID </ OtherText > <! -- 255 character limit -- >
< OtherHex > 0102de03ad00be09ef </ OtherHex > <! -- 255*2 character limit -- >
</ ClientID >