N-Tron 7010TX Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 157

N-Tron 7010TX Series Скачать руководство пользователя страница 9

(Revised 2011-07-21)

Page 9 of 157

SAFETY WARNINGS

GENERAL SAFETY WARNINGS

WARNING:

If the equipment is used in the manner not specified by N-Tron Corp., the protection

provided by the equipment may be impaired.

LASER SAFETY

(Single Mode Fiber Models -40, -80 and optional NTSFP-LX -40 and -80)

CAUTION:

CLASS 1 LASER PRODUCT. Do not stare into the laser!

SUPPORT:

Contact Information

N-Tron Corp.
820 South University Blvd. Suite 4E
Mobile, AL 36609
TEL: (251) 342-2164
FAX: (251) 342-6353
WEBSITE:

www.n-tron.com

E-MAIL:

[email protected]

ENVIRONMENTAL SAFETY

WARNING:

The unit may become very hot to the touch in high temperature environments, so extreme

caution should be exercised in handling when energized. The unit should be disconnected from power and
allowed to cool for approximately 5 minutes before touching in high temperature applications.

ELECTRICAL SAFETY

Must be powered by a Class 2 source only.

WARNING:

Disconnect the power cable before removing the top cover.

WARNING:

Do not operate the unit with the any cover removed.

WARNING:

Properly ground the unit before connecting anything else to the unit. Units not properly

grounded may result in a safety risk and could be hazardous and may void the warranty. See the grounding
technique section of this user manual for proper ways to ground the unit.

«
...
7
8
9
10
11
...
»

Содержание 7010TX Series






























































































































































Отзывы:

Нет отзывов