N-Tron 7010TX Series Скачать руководство пользователя страница 36

Страница: 36 / 157

(Revised 2011-07-21)

Page 36 of 157

DHCP – Server – Setup Profiles

The Setup Profiles tab under the DHCP/Server category lists the following information about the current
state of the server and the existing network profiles:

Server Enabled

Indicates whether the DHCP server is active.

Allow Broadcast

Indicates whether the DHCP server will process broadcast messages.

Delay Broadcast (Ms)

The amount of time the DHCP server will delay processing a broadcast message.

Server ID

Descriptive name of the DHCP server.

Profile Name

Descriptive name of the network profile.

Address Pool

Range of IP addresses which the profile can use.

Subnet Address

The most restrictive subnet address calculated from the address pool range.

Subnet Mask

The most restrictive subnet mask calculated from the address pool range.

Domain Name

The domain name to be presented to the client.

Has Profile IP Maps

Indicates whether the profile has IP maps associated with it.

Delete

Deletes the profile along with all IP maps and bindings associated with it. The Default profile cannot be deleted.

Содержание 7010TX Series






























































































































































Результаты поиска

Содержание 7010TX Series

Отзывы:

N-Tron 7010TX Series, Руководство пользователя и инструкция по установке, Страница: 36 / 157

Результаты поиска

Содержание 7010TX Series

Отзывы: