N-Tron 308FX2 Скачать руководство пользователя страница 34

(Revised 2010-7-30) 

34 

  

N-TRON Limited Warranty

 

 

N-TRON, Corp. warrants to the end user that this hardware product will be free from defects in workmanship and materials, under normal 
use and service, for the applicable warranty period from the date of purchase from N-TRON or its authorized reseller.  If a product does not 
operate as warranted during the applicable warranty period, N-TRON shall, at its option and expense, repair the defective product or part, 
deliver  to  customer  an  equivalent  product  or  part  to  replace  the  defective  item,  or  refund  to  customer  the  purchase  price  paid  for  the 
defective  product.    All  products  that  are  replaced  will  become  the  property  of  N-TRON.    Replacement  products  may  be  new  or 
reconditioned.    Any  replaced  or  repaired  product  or  part  has  a  ninety  (90)  day  warranty  or  the  remainder  of  the  initial  warranty  period, 
whichever is longer.  N-TRON shall not be responsible for any custom software or firmware, configuration information, or memory data of 
customer contained in, stored on, or integrated with any products returned to N-TRON pursuant to any warranty. 
 
OBTAINING WARRANTY SERVICE: Customer must contact N-TRON within the applicable warranty period to obtain warranty service 
authorization.  Dated proof of purchase from N-TRON or its authorized reseller may be required.  Products returned to N-TRON must be 
pre-authorized by N-TRON with a Return Material Authorization (RMA) number marked on the outside of the package, and sent prepaid 
and  packaged  appropriately  for  safe  shipment.  Responsibility  for  loss  or  damage  does  not  transfer  to  N-TRON  until  the  returned  item  is 
received by N-TRON.  The repaired or replaced item will be shipped to the customer, at N-TRON‟s expense, not later than thirty (30) days 
after N-TRON receives the product.  N-TRON shall not be responsible for any software, firmware, information, or memory data of customer 
contained in, stored on, or integrated with any products returned to N-TRON for repair, whether under warranty or not. 
 
ADVANCE REPLACEMENT OPTION:  Upon registration, this product qualifies for advance replacement.  A replacement product will be 
shipped within three (3) days after verification by N-TRON that the product is considered defective.  The shipment of advance replacement 
products  is  subject  to  local  legal  requirements  and  may  not  be  available  in  all  locations.    When  an  advance  replacement  is  provided  and 
customer fails to return the original product to N-TRON within fifteen (15) days after shipment of the replacement, N-TRON  will charge 
customer for the replacement product, at list price. 
 
WARRANTIES EXCLUSIVE: IF AN N-TRON PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE 
REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE 
PAID, AT N-TRON'S OPTION. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES 
ARE  EXCLUSIVE  AND  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  TERMS,  OR  CONDITIONS,  EXPRESS  OR  IMPLIED, 
EITHER  IN  FACT  OR  BY  OPERATION  OF  LAW,  STATUTORY  OR  OTHERWISE,  INCLUDING  WARRANTIES,  TERMS,  OR 
CONDITIONS  OF  MERCHANTABILITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  SATISFACTORY  QUALITY, 
CORRESPONDENCE WITH DESCRIPTION,  AND NON-INFRINGEMENT,  ALL OF  WHICH  ARE EXPRESSLY DISCLAIMED. N-
TRON  NEITHER  ASSUMES  NOR  AUTHORIZES  ANY  OTHER  PERSON  TO  ASSUME  FOR  IT  ANY  OTHER  LIABILITY  IN 
CONNECTION  WITH  THE  SALE,  INSTALLATION,  MAINTENANCE  OR  USE  OF  ITS  PRODUCTS.  N-TRON  SHALL  NOT  BE 
LIABLE  UNDER  THIS  WARRANTY  IF  ITS  TESTING  AND  EXAMINATION  DISCLOSE  THAT  THE  ALLEGED  DEFECT  OR 
MALFUNCTION  IN  THE  PRODUCT  DOES  NOT  EXIST  OR  WAS  CAUSED  BY  CUSTOMER'S  OR  ANY  THIRD  PERSON'S 
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR MODIFY 
THE  PRODUCT,  OR  ANY  OTHER  CAUSE  BEYOND  THE  RANGE  OF  THE  INTENDED  USE,  OR  BY  ACCIDENT,  FIRE, 
LIGHTNING, POWER CUTS OR OUTAGES, OTHER HAZARDS, OR ACTS OF GOD.  
 
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, N-TRON ALSO EXCLUDES FOR ITSELF AND ITS 
SUPPLIERS  ANY  LIABILITY,  WHETHER  BASED  IN  CONTRACT  OR  TORT  (INCLUDING  NEGLIGENCE),  FOR  INCIDENTAL, 
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, 
LOSS  OF  BUSINESS,  LOSS  OF  INFORMATION  OR  DATA,  OR  OTHER  FINANCIAL  LOSS  ARISING  OUT  OF  OR  IN 
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF 
ITS  PRODUCTS,  EVEN  IF  N-TRON  OR  ITS  AUTHORIZED  RESELLER  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF  SUCH 
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT N-
TRON'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED 
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.  
 
DISCLAIMER:  Some  countries,  states,  or  provinces  do  not  allow  the  exclusion  or  limitation  of  implied  warranties  or  the  limitation  of 
incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above 
limitations and exclusions may be limited in their application to you. When the implied warranties are not allowed  to be excluded in their 
entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary 
depending on local law.  
 
GOVERNING LAW: This Limited Warranty shall be governed by the laws of the State of Alabama, U.S.A.

 

 

Содержание 308FX2



































Отзывы: