background image

(Revised 2011-03-14) 

39 

 

N-TRON Limited Warranty

 

 

N-TRON, Corp. warrants to the end user that this hardware product will be free from defects in workmanship and materials, under normal use 
and service, for the applicable warranty period from the date of purchase from N-TRON or its authorized reseller.  If a product does not operate 
as  warranted  during  the  applicable  warranty  period,  N-TRON  shall,  at  its  option  and  expense,  repair  the  defective  product  or  part,  deliver  to 
customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product.  All 
products that are replaced will become the property of N-TRON.  Replacement products may be new or reconditioned.  Any replaced or repaired 
product  or  part  has  a  ninety  (90)  day  warranty  or  the  remainder  of  the  initial  warranty  period,  whichever  is  longer.    N-TRON  shall  not  be 
responsible for any custom software or firmware, configuration information, or memory data of customer contained in, stored on, or integrated 
with any products returned to N-TRON pursuant to any warranty. 
 
OBTAINING  WARRANTY  SERVICE:  Customer  must  contact  N-TRON  within  the  applicable  warranty  period  to  obtain  warranty  service 
authorization.  Dated proof of purchase from N-TRON or its authorized reseller may be required.  Products returned to N-TRON must be pre-
authorized  by  N-TRON  with  a  Return  Material  Authorization  (RMA)  number  marked  on  the  outside  of  the  package,  and  sent  prepaid  and 
packaged appropriately for safe shipment. Responsibility for loss or damage does not transfer to N-TRON until the returned item is received by 
N-TRON.  The repaired or replaced item will be shipped to the customer, at N-TRON’s expense, not later than thirty (30) days after N-TRON 
receives  the  product.    N-TRON  shall  not  be  responsible  for  any  software,  firmware,  information,  or  memory  date  of  customer  contained  in, 
stored on, or integrated with any products returned to N-TRON for repair, whether under warranty or not. 
 
ADVANCE  REPLACEMENT  OPTION:    Upon  registration,  this  product  qualifies  for  advance  replacement.    A  replacement  product  will  be 
shipped  within  three  (3)  days  after  verification  by  N-TRON  that  the  product  is  considered  defective.    The  shipment  of  advance  replacement 
products  is  subject  to  local  legal  requirements  and  may  not  be  available  in  all  locations.    When  an  advance  replacement  is  provided  and 
customer  fails  to  return  the  original  product  to  N-TRON  within  fifteen  (15)  days  after  shipment  of  the  replacement,  N-TRON  will  charge 
customer for the replacement product, at list price. 
 
WARRANTIES  EXCLUSIVE:  IF  AN  N-TRON  PRODUCT  DOES  NOT  OPERATE  AS  WARRANTED  ABOVE,  CUSTOMER'S  SOLE 
REMEDY  FOR  BREACH  OF  THAT  WARRANTY  SHALL  BE  REPAIR,  REPLACEMENT,  OR  REFUND  OF  THE  PURCHASE  PRICE 
PAID,  AT  N-TRON'S  OPTION.  TO  THE  FULL  EXTENT  ALLOWED  BY  LAW,  THE  FOREGOING  WARRANTIES  AND  REMEDIES 
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER 
IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF 
MERCHANTABILITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  SATISFACTORY  QUALITY,  CORRESPONDENCE  WITH 
DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. N-TRON NEITHER ASSUMES NOR 
AUTHORIZES  ANY  OTHER  PERSON  TO  ASSUME  FOR  IT  ANY  OTHER  LIABILITY  IN  CONNECTION  WITH  THE  SALE, 
INSTALLATION,  MAINTENANCE  OR  USE  OF  ITS  PRODUCTS.  N-TRON  SHALL  NOT  BE  LIABLE  UNDER  THIS  WARRANTY  IF 
ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT 
EXIST  OR  WAS  CAUSED  BY  CUSTOMER'S  OR  ANY  THIRD  PERSON'S  MISUSE,  NEGLECT,  IMPROPER  INSTALLATION  OR 
TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE 
RANGE  OF  THE  INTENDED  USE,  OR  BY  ACCIDENT,  FIRE,  LIGHTNING,  POWER  CUTS  OR  OUTAGES,  OTHER  HAZARDS,  OR 
ACTS OF GOD.  
 
LIMITATION  OF  LIABILITY:  TO  THE  FULL  EXTENT  ALLOWED  BY  LAW,  N-TRON  ALSO  EXCLUDES  FOR  ITSELF  AND  ITS 
SUPPLIERS  ANY  LIABILITY,  WHETHER  BASED  IN  CONTRACT  OR  TORT  (INCLUDING  NEGLIGENCE),  FOR  INCIDENTAL, 
CONSEQUENTIAL,  INDIRECT,  SPECIAL,  OR  PUNITIVE  DAMAGES  OF  ANY  KIND,  OR  FOR  LOSS  OF  REVENUE  OR  PROFITS, 
LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION 
WITH  THE  SALE,  INSTALLATION,  MAINTENANCE,  USE,  PERFORMANCE,  FAILURE,  OR  INTERRUPTION  OF  ITS  PRODUCTS, 
EVEN  IF  N-TRON  OR  ITS  AUTHORIZED  RESELLER  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF  SUCH  DAMAGES,  AND 
LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT N-TRON'S OPTION. THIS 
DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED  HEREIN SHALL FAIL OF 
ITS ESSENTIAL PURPOSE.  
 
DISCLAIMER: Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental 
or consequential damages  for certain products supplied to consumers or the limitation of liability for personal injury, so the above limitations 
and exclusions may be limited in their application to you. When the implied warranties are not allowed to be excluded in their entirety, they will 
be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local 
law.  
 
GOVERNING LAW: This Limited Warranty shall be governed by the laws of the State of Delaware, U.S.A.

 

 

Содержание 102MC








































Отзывы: