N.KO B10 ELECTRA, Руководство по эксплуатации

Страница: 12 / 22

12
Important:
The shift during machining is always from left to the right.
Attention :
The device operators must hold the device with both hands.
11.3 Bevel angle and shape change. Milling head replacement – Type ECO
Machine B10 ELECTRA is constructed for the use of more milling heads.
For the head replacement, proceed as follows.
• Disconnect the machine from electricity supply.
• Release the setting arresting screws (fig.11.3.1 position A) by the enclosed allen key
(fig. 11.3.1 position C)
• Turn the guiding plate (fig.11.3.1 position B) for complete disassembly from the
machine
• Secure the spindle against turning with the button, which is located on the top side of
the gearbox (fig 11.3.2 position A) or by using the enclosed mandrel (fig. 10.3.3
position A)
• Use the allen key (fig.11.3.2 position D), release and disassemble the roller screw
(fig. 11.3.2 position C) and roller (fig.11.3.2 position B)
• Now disassemble the milling head by enclosed special tube, double-sided spanner
(fig.11.3.3 position B plus C)
• Use the same process to assemble new head and reassemble the machine.
• All connections must be appropriately fastened.
Fig. 11.3.1