B901
23
N.B.:
The N-Com B901 systems keeps an active connection with a mobile phone or a GPS even
during Bluetooth communication with other intercom systems.
The intercom system connected to N-Com B901 may not allow simultaneous connection to a
mobile phone.
Only one system paired up in Universal Intercom mode can be stored.
15.3.
Universal Conference (chain intercom)
The “Universal Conference” mode can be used to connect in conference call N-Com systems of the
“900” series and one system paired up in Universal Intercom mode.
N.B.
: This mode can also be used by connecting only N-Com “900” series systems, in alternative to the
“Smart Conference” mode (chapter 14.3).
The connection procedure is outlined in the diagram provided here below:
1.
System A must have been paired up beforehand to two B systems (Universal Intercom pair
up) and C.
2.
System A has to initiate the first intercom connection with system B (Universal Intercom), by
pressing the relative intercom connection command.
3.
At this point, system C can join the intercom conference call, establishing an intercom
connection with system A.
