EN
20
14.
N-COM INTERCOM (SERIES “900”)
The N-Com B901 system allows communication with other N-Com systems, up to a distance of about
700
m (in open field, with no obstacles).
Important: The procedure described below refers exclusively to the pairing up and operation between
the B901 and the “900” series N-Com systems.
To pair up to N-Com systems of a range other than the “900” series, please refer to the procedure
described in chapter 15 “Universal Intercom”.
N.B.:
The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
N.B.:
The range of the communication varies depending on the N-Com systems used.
14.1.
Intercom pairing up
Make sure the B901 is turned off;
Put the systems in “Configuration” mode: press the “
ON
” key and keep it pressed for 4
seconds, until the blue LED starts flashing;
On both systems, press the key “
” until you reach the option “
Intercom pair up
”;
On system A, press the key pertaining to the “pre-setting position” where you wish to save
system B.
Pairing up CHANNEL 1
Briefly press “
ON
”.
Pairing up CHANNEL 2
Press the “
ON
” key twice.
Pairing up CHANNEL 3
Press the “
ON
” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
14.2.
Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the
command related to the channel where the system was saved.
Connection CHANNEL 1
Briefly press “
ON
”.
Call CHANNEL 2
Press the “
ON
” key twice.
Call CHANNEL 3
Press the “
ON
” key three times.
Disconnection of active intercom
Briefly press “
ON
”.
The B901 system is equipped with the VOX function, which makes it possible to switch the intercom
on and off vocally. Once the intercom is manually activated for the first time, the B6L system detects
your voice and automatically activates/deactivates the communication.
You can enable / disable the “VOX” function and set the activation sensitivity,
using the N-Com EASYSET program or the N-Com EASYSET APP.
