MZ electronic EV-020, Инструкция по эксплуатации

Страница: 42 / 124

EV-020 Rev. 03 – 2006
English
42
Once the “Sensor Detection” function has recognised a “Standard” type sensor
instead of a “Project” sensor, when the “Sensor Calibrat.” menu is entered again,
the menu options will “configure” themselves according to the sensor detected.
Standard and X.. Project series
sensor menu
Sensor Calibrat
Barb. Circ. 3 3 . 0
E x i t
500 – 1000 – 1500 –2000 W Project
series sensor menu
Sensor Calibrat
Red. Factor 5 7 . 0
E x i t
Barbotin Circumference
In this row the user must enter the
circumference of the gipsy (in
centimetres or inches). Use the Table 1
provided to calculate the
circumference.
Settable values: centimetres or inches.
Default value, 33 cm. Reduction Factor
In this row the user must enter the
reduction factor. See next Table 2 for the
correct value to be entered
Default value, 57.
Select with
Select value with
Confirm with
Exit
To return to the settings menu.
Confirm with