PEGAZ
edition 2/ 2021-05-10
12 |
P a g e
Tilting foot
The Pegaz stroller can be equipped with a tilting foot included in the
additional equipment. The tilting foot makes it easy to maneuver the
stroller when it encounters small obstacles, e.g. stairs, curbs. To raise the
front wheels, press the tilting foot pedal and pull both handles toward
you.
Adjustable ergonomic handles to push
the stroller
The
Pegaz stroller is equipped with adjustable
push handles. In order to change their angle,
press the buttons located at their ends and
rotate to change their angle of inclination (Fig.
9.7.1 and 9.7.2). After placing both handles in a
suitable position, release the pressure. The
handles can change position every 90 degrees.
Footrest. Regulation and use
Installation.
To mount the footrest, slide it onto the mounting pins located at the bottom of the
frame at several height levels. A click sounds when the fastening hooks come into place. After mounting
the footrest, make sure that it is properly attached. To check this, pull the footrest vigorously up - it should
stay at the same position.
Disassembly.
To remove the footrest, press the two release buttons placed on the sides of the
footrest at the same time and lift the footrest.
The stroller can not be used without a footrest.
Use of a footrest
. It is recommended to
adjust the footrest plate properly. Child's feets
should rest freely on it with its entire surface.
Also child’s thighs should lie parallel to the seat
surface (Fig. 9.8.1 and 9.8.2). There are straps in
the footrest plate to secure the child's feet. It is
recommended to put them on when using the
stroller. The footrest plate is placed in a
horizontal position as standard. However,
during transport, storage, rehabilitation, getting
on and off the Pegaz stroller, the footplate must be removed.
Fig.
9.6.
Tilting foot
Fig.
9.7.1
Fig.
9.7.2
Handle to push – position a Handle to push – position b
Fig.
9.8.1
Fig.
9.8.2
Minimal position Maximal position
