11
7.
The Reuse of the stroller
The product is suitable for reuse. All products that are reused may change
their usability due to change in their specifications and performance
characteristics and, therefore, need to be checked for efficacy. The safety of
the persons using the stroller as well as the accompanying people may be
endangered in such circumstances. When maintained properly, the product
keeps its quality for about three years. To reuse the stroller you need to
dismantle all upholstered parts and exchange them for the new ones.
The stroller’s frame, the wheels and the handles need to be cleaned and
disinfected with available cleaning agents. The stroller needs to be
subsequently examined by an authorized specialist as to wear and tear as
well as damage.
All parts that are mismatched or unsuitable for use need to be replaced.
Only then the stroller can be reused.
The maintenance plan and information about the parts and tools are
contained in part 11:
“ The periodical maintenance.”
8.
The manual
8.1.
Stroller assembly
8.1.1.
Unfolding the stroller’s frame
To unfold the stroller, release the transport lock and pull up the handle bar
until you hear a “click”. It may be necessary to push down the ‘expanding’
points behind the backrest and the footrest until they are blocked.
Figure 8.1.1.a.
Figure 8.1.1.b.
8.1.2.
Front wheel assembly.
To attach the wheels, insert the wheel axle into the folding system slot until
you hear a ‘click’. The audible clicking soun
d is the indication that the
assembly has been done properly.
