Product Manual - Treadmill
170914105200
9
9
Troubleshooting
Malfunction.
Probable Cause
Solution
No Power.
On/Off Switch.
Turn the switch to the ON position.
Insufficient power source.
Plug treadmill into a 15 amp circuit.
Reset house circuit breaker.
Damaged power cord.
Have a licensed electrician replace the cord.
Power cord improperly seated in socket
Inspect power connection at wall outlet for
damage. Have a professional check the
power outlet.
Running Belt slips off
centre.
Uneven floor surface.
Position the treadmill on a level surface.
Check running belt & re-tension as required.
See section on "HOW TO POSITION AND
STABILIZE THE TREADMILL"
Maximum speed is
reduced.
User is pushing the running belt. This
occurs when the runner is running faster
than the running belt will travel, with the
result of the running belt being pushed
with the runner's feet.
Instruct users not to push the running belt in
either direction.
User is stalling the running belt. This will
occur with heavier users at lower running
belt speeds. The running belt will "stall" if
the user is traveling slower than the
running belt speed.
Running belt/deck malfunction. The deck
laminate is worn through or the
underside of the running belt is glazed
over (hard / glossy)
Replace belt and deck.
Insufficient power source.
Plug treadmill into a standard
240V 50Hz
household power outlet.
Rubbing sound from
underneath machine.
Foreign objects may be stuck underneath
the machine.
Inspect underneath running belt and
machine. Remove and debris or objects that
may cause interference with the treadmill.
Insufficient power source.
Plug machine into a standard
240V 50Hz
household power outlet.
Display does not
illuminate when
machine is powered
on.
Loose connection.
Check all electrical connections for proper
attachment.
Unit resets randomly
or pauses
Insufficient power source.
Plug treadmill into a standard 15amp 240V
household power outlet.
Damaged ground prong on power cord.
Have a licensed electrician replace the cord.
Emergency stop magnet not engaged.
Re-engage the emergency stop magnet.
Towel or other item may be making
contact with stop switch while user is
running.
Move all possible obstructions off the
display console and handlebar.
